工藝流程：Process flow:這種處理系統組合十分緊湊，集吸附、脫附和催化燃燒于一體。This treatment system combination is very compact, integrating adsorption, desorption, and catalytic combusti...
工藝流程：Process flow:這種處理系統組合十分緊湊，集吸附、脫附和催化燃燒于一體。This treatment system combination is very compact, integrating adsorption, desorption, and catalytic combusti...
1.危險廢物貯存間必須要密閉建設，門口內側設立圍堰，地面應做好硬化及“三防”措施。(防揚散、防流失、防滲漏)。 The hazardous waste storage room must be constructed in a closed manner, with a cofferdam set up on...
一、預處理系統1、 Preprocessing system首先通過初、中、高三級過濾法，去除廢氣中的細小顆粒，使有機廢氣滿足沸石轉輪吸附的潔凈度要求；再通過升溫降濕的方法，使有機廢氣滿足沸石轉輪吸附的溫濕度要求；Firstly, the fine particles in the waste gas are...
（1）運行阻力大(1) High operating resistance原因可能是：①結露糊帶；②脈沖閥不工作或損壞；③壓縮空氣壓力太低；④脈沖閥工作時提升閥未關閉或關閉不嚴；⑤一個或多個提升閥處于關閉狀態。The reason may be: ① condensation and paste; ② Pul...
（1）高濃度廢氣處理實現自供熱燃燒，運行費用低，性價比合理(1) High concentration exhaust gas treatment achieves self heating combustion with low operating costs and reasonable cost-eff...
一、選址和布局：危廢暫存間應選址在廠區內的下風向、離產生源近、地勢相對較低且地面硬化、周圍有防護設施和安全距離的地方，并且要合理布局，方便運輸和操作。1、 Site selection and layout: The hazardous waste temporary storage room should ...
地圖 - 熱線
