我們的危廢暫存間采用樂高式智能拼裝架構，支持從5㎡到500㎡的無縫擴容：

Our hazardous waste storage room adopts a Lego style intelligent assembly architecture, supporting seamless expansion from 5 square meters to 500 square meters:

橫向擴展：通過專利卡扣式側板（無需焊接）單日可增容20㎡；

Horizontal expansion: With patented snap on side panels (no need for welding), the daily capacity can be increased by 20 square meters;

縱向升級：雙層加固框架承重達3.8噸/㎡，滿足立體化存儲需求；

Vertical upgrade: The double-layer reinforced frame can bear up to 3.8 tons/square meter, meeting the demand for three-dimensional storage;

智能調控：物聯網系統實時計算庫容飽和度，自動生成擴容建議報告。

Intelligent regulation: The IoT system calculates the saturation of storage capacity in real-time and automatically generates a report on expansion suggestions.

用專利技術建立專業壁壘：

Establishing professional barriers through patented technology:

彈性連接技術：

Elastic connection technology:

模塊間采用航空級鈦合金伸縮接頭，抗震等級達9級，避免傳統焊接導致的防腐層破損風險。

Aviation grade titanium alloy expansion joints are used between modules, with a seismic rating of 9, to avoid the risk of damage to the anti-corrosion layer caused by traditional welding.

動態密封系統：

Dynamic sealing system:

擴容時自動激活磁流體密封條，確保接縫處VOCs逸散濃度＜5mg/m?（國標限值50mg/m?）。

Automatically activate the magnetic fluid sealing strip during expansion to ensure that the VOCs emission concentration at the joint is less than 5mg/m? The national standard limit is 50mg/m.

智能地基適配：

Intelligent foundation adaptation:

配備液壓調平支座，可適應±15cm的地面坡度差，老舊車間改造無需額外地面修整。

Equipped with hydraulic leveling support, it can adapt to a ground slope difference of ± 15cm, and there is no need for additional ground finishing for the renovation of old workshops.

可擴展的情況

Scalable situation

空間擴展：如果暫存間周圍有可利用的閑置空間，且建筑結構允許，可以通過拆除部分非承重隔墻、向室外擴建或利用上層空間搭建夾層等方式增加暫存間的使用面積，從而提高承載量。例如，一些企業的倉庫暫存間，在企業發展、貨物存儲需求增加時，會將相鄰的閑置辦公室改造為暫存空間。

Space expansion: If there is available idle space around the temporary storage room and the building structure allows, the usable area of the temporary storage room can be increased by dismantling some non load bearing partition walls, expanding to the outside, or using the upper space to build mezzanines, thereby increasing the load-bearing capacity. For example, some companies may transform adjacent idle offices into temporary storage spaces in their warehouse storage rooms as the company develops and the demand for goods storage increases.

設備升級：更換承載能力更強的存儲設備或貨架系統，能提高單位面積的承載量。比如將普通貨架更換為重型貨架，或者采用自動化立體倉庫系統，通過增加貨架高度、優化空間布局，提升暫存間的整體承載能力。

Equipment upgrade: Replacing storage devices or shelf systems with stronger load-bearing capacity can increase the load-bearing capacity per unit area. For example, replacing ordinary shelves with heavy-duty shelves, or adopting an automated three-dimensional warehouse system to increase shelf height, optimize space layout, and enhance the overall load-bearing capacity of the temporary storage room.

優化布局：合理規劃暫存間內的貨物擺放方式，提高空間利用率，也能在一定程度上實現承載量的彈性擴展。例如，采用科學的貨物碼放方法，如根據貨物尺寸和重量進行分層碼放，或者使用托盤等工具進行單元化存儲，使貨物擺放更加緊湊有序，從而騰出更多空間存放更多貨物。

Optimize layout: Reasonably plan the placement of goods in the temporary storage room, improve space utilization, and also achieve elastic expansion of carrying capacity to a certain extent. For example, using scientific methods of goods stacking, such as layering based on the size and weight of the goods, or using pallets and other tools for modular storage, makes the goods more compact and orderly, thereby freeing up more space to store more goods.

擴展受限的情況

The situation where expansion is limited

建筑結構限制：如果暫存間是在固定的建筑結構內，且建筑結構不允許進一步改造或擴展，那么空間上的擴展就會受到限制。例如，一些老舊建筑的暫存間，其墻體、樓板等結構承載能力有限，無法承受額外的重量或改造。

Architectural structural limitations: If the temporary storage room is located within a fixed building structure and the building structure does not allow for further modification or expansion, the spatial expansion will be limited. For example, some temporary storage rooms in old buildings have limited structural load-bearing capacity such as walls and floors, which cannot withstand additional weight or renovation.

消防與安全規范：消防法規和安全標準對暫存間的面積、貨物存儲密度、通道寬度等有嚴格要求。即使有空間可擴展，若擴展后不符合消防和安全規范，也不能進行擴展。比如，為了保證人員疏散和消防設備的正常使用，暫存間內必須留出足夠寬度的通道，這就限制了貨物的堆放空間。

Fire and safety regulations: Fire regulations and safety standards have strict requirements for the area of temporary storage rooms, storage density of goods, and width of passages. Even if there is space for expansion, if the expansion does not comply with fire and safety regulations, it cannot be carried out. For example, in order to ensure the evacuation of personnel and the normal use of fire-fighting equipment, a sufficiently wide passage must be left in the temporary storage room, which limits the storage space for goods.

環境條件限制：某些暫存間對環境條件有特殊要求，如溫度、濕度、通風等。當承載量增加時，可能會超出環境控制設備的調節能力，影響貨物的存儲質量。例如，在一些存儲藥品或食品的暫存間，需要嚴格控制溫濕度，若盲目增加貨物量，可能導致溫濕度失衡，影響貨物品質。

Environmental condition limitations: Some temporary storage rooms have special requirements for environmental conditions, such as temperature, humidity, ventilation, etc. When the carrying capacity increases, it may exceed the adjustment capacity of environmental control equipment, affecting the storage quality of goods. For example, in some temporary storage rooms for storing drugs or food, strict temperature and humidity control is required. Blindly increasing the quantity of goods may lead to an imbalance in temperature and humidity, affecting the quality of the goods.

本文由危廢暫存間友情奉獻.更多有關的知識請點擊:http://www.shtzxx.cn我們將會對您提出的疑問進行詳細的解答，歡迎您登錄網站留言.

This article is dedicated to friendship For more information, please click: We will provide detailed answers to your questions. You are welcome to log in to our website and leave a message