一、噴漆房廢氣的特性與挑戰

　　1、 Characteristics and challenges of exhaust gas in paint spraying rooms

　　要處理廢氣，首先必須了解它的特點：

　　To treat exhaust gas, it is necessary to first understand its characteristics:

　　1. 成分復雜：

　　1. Complex composition:

　　· 揮發性有機物（VOCs）：來自油漆、稀釋劑、固化劑中的有機溶劑，如苯、甲苯、二甲苯、甲醛、酯類、酮類等。這是最主要的污染物，也是環保監管的重點。

　　·Volatile Organic Compounds (VOCs): Organic solvents from paints, diluents, and curing agents, such as benzene, toluene, xylene, formaldehyde, esters, ketones, etc. This is the main pollutant and also the focus of environmental supervision.

　　· 漆霧（顆粒物）：噴涂過程中未附著在工作表面的過噴漆霧，是液態或半固態的顆粒物。

　　·Paint mist (particulate matter): Over spray paint mist that does not adhere to the working surface during the spraying process, which is liquid or semi-solid particulate matter.

　　2. 排放不穩定：

　　2. Unstable emissions:

　　· 廢氣濃度和風量隨著噴涂作業的進行而劇烈波動，對處理設備的穩定性要求高。

　　·The concentration and air volume of exhaust gas fluctuate sharply with the progress of spraying operations, which requires high stability of the treatment equipment.

　　3. 危害性大：

　　3. High level of harm:

　　· VOCs是形成PM2.5和臭氧的重要前體物，對大氣環境危害大。

　　·VOCs are important precursors for the formation of PM2.5 and ozone, posing a significant threat to the atmospheric environment.

　　· 部分VOCs有毒、有惡臭，直接影響員工健康和周邊環境。

　　·Some VOCs are toxic and have a foul odor, directly affecting the health of employees and the surrounding environment.

　　核心挑戰：高效去除漆霧（預處理）和徹底凈化VOCs（核心處理）。

　　Core challenge: Efficient removal of paint mist (pre-treatment) and thorough purification of VOCs (core treatment).

　　二、廢氣處理系統的主要組成部分

　　2、 The main components of the exhaust gas treatment system

　　一個完整的噴漆房廢氣處理系統通常分為兩級或三級：

　　A complete paint booth exhaust gas treatment system is usually divided into two or three stages:

　　1. 第一級：漆霧處理（預處理系統）

　　1. Level 1: Paint Mist Treatment (Pre treatment System)

　　· 目的：去除廢氣中90%-99%的漆霧顆粒，保護后續的VOCs處理設備，防止其堵塞和中毒失效。

　　·Purpose: To remove 90% -99% of paint mist particles from exhaust gas, protect subsequent VOCs treatment equipment, and prevent blockage and poisoning failure.

　　· 常用技術：

　　·Common techniques:

　　· 水簾/水旋式：最常用。利用高速氣流沖擊水面形成水幕，漆霧被水捕集。結構簡單，成本低，是噴漆房的標配預處理裝置。

　　·Water curtain/water spin type: most commonly used. Using high-speed airflow to impact the water surface to form a water curtain, paint mist is captured by the water. The structure is simple and the cost is low, making it a standard pre-treatment device for paint spraying rooms.

　　· 文丘里式：通過喉管結構加速水流，將漆霧顆粒粉碎并潤濕，去除效率高于普通水簾。

　　·Venturi style: accelerates water flow through a throat structure, crushes and wets paint mist particles, and has a higher removal efficiency than ordinary water curtains.

　　· 干式過濾：使用多層不同材質的過濾材料（如玻璃纖維棉、迷宮式紙盒）直接物理攔截漆霧。無需用水，無廢水產生，更換方便，但耗材成本較高。近年來因其環保性（無廢水）而越來越受歡迎。

　　·Dry filtration: using multiple layers of filter materials of different materials (such as fiberglass cotton, maze paper boxes) to directly physically intercept paint mist. No water is needed, no wastewater is generated, easy to replace, but the cost of consumables is relatively high. In recent years, it has become increasingly popular due to its environmental friendliness (no wastewater).

　　2. 第二級：VOCs處理（核心凈化系統）

　　2. Second level: VOCs treatment (core purification system)

　　· 經過預處理后，廢氣中主要剩下氣態的VOCs，需要采用專門的技術進行凈化。

　　·After pre-treatment, the main remaining gaseous VOCs in the exhaust gas need to be purified using specialized techniques.

　　三、核心VOCs處理技術詳解

　　3、 Detailed explanation of core VOCs treatment technology

　　以下是幾種主流且適用于噴漆房的VOCs處理技術：

　　The following are several mainstream VOCs treatment technologies suitable for spray painting rooms:

　　1. 吸附法

　　1. Adsorption method

　　· 原理：利用活性炭、沸石等多孔材料巨大的比表面積，將VOCs分子吸附在其表面，從而使廢氣得到凈化。

　　·Principle: By utilizing the large specific surface area of porous materials such as activated carbon and zeolite, VOCs molecules are adsorbed on their surfaces, thereby purifying the exhaust gas.

　　· 常用設備：活性炭吸附箱、沸石轉輪濃縮裝置。

　　·Common equipment: Activated carbon adsorption box, zeolite rotary concentrator.

　　· 優點：

　　·Advantages:

　　· 技術成熟，設備簡單，投資成本較低。

　　·Mature technology, simple equipment, and low investment cost.

　　· 對低濃度、大風量的廢氣處理效果好。

　　·Good treatment effect for low concentration and high air volume exhaust gas.

　　· 缺點：

　　·Disadvantages:

　　· 活性炭會飽和，需要定期更換或脫附再生，產生二次危廢（廢活性炭）或需要配套脫附系統。

　　·Activated carbon will become saturated and requires regular replacement or desorption regeneration, resulting in secondary hazardous waste (waste activated carbon) or the need for a supporting desorption system.

　　· 運行成本（耗材成本）較高。

　　·The operating cost (consumable cost) is relatively high.

　　· 適用場景：中小風量、中低濃度，或作為濃縮裝置與其他技術（如RTO）聯用。

　　·Applicable scenarios: small to medium air volume, medium to low concentration, or used as a concentration device in combination with other technologies (such as RTO).

　　2. 燃燒法（銷毀法）

　　2. Burning method (destruction method)

　　· 原理：將VOCs在高溫下氧化分解為無害的CO?和H?O。

　　·Principle: Decompose VOCs into harmless CO ? and H ? O through oxidation at high temperatures.

　　· 直接燃燒（TO）：直接加熱至750℃以上燃燒。能耗高，僅適用于高濃度廢氣。

　　·Direct combustion (TO): Heating directly to above 750 ℃ for combustion. High energy consumption, only suitable for high concentration exhaust gas.

　　· 蓄熱式燃燒（RTO）：目前處理噴漆廢氣的首選高效技術。通過陶瓷蓄熱體回收燃燒產生的熱量，預熱進入的廢氣，熱能回收效率可達95%以上，非常節能。

　　·Regenerative combustion (RTO): currently the preferred high-efficiency technology for treating paint exhaust gas. By using ceramic heat storage to recover the heat generated by combustion and preheat the incoming exhaust gas, the heat recovery efficiency can reach over 95%, which is very energy-saving.

　　· 催化燃燒（CO/RCO）：在催化劑作用下，VOCs在較低溫度（通常300-350℃）下即可氧化分解，更加節能。RCO是蓄熱式催化燃燒。

　　·Catalytic combustion (CO/RCO): Under the action of a catalyst, VOCs can be oxidized and decomposed at lower temperatures (usually 300-350 ℃), making it more energy-efficient. RCO is a regenerative catalytic combustion.

　　· 優點：

　　·Advantages:

　　· 凈化效率高（通常>98%）。

　　·High purification efficiency (usually>98%).

　　· 處理徹底，無二次污染（燃燒后產物為CO?和H?O）。

　　·Thoroughly processed, with no secondary pollution (combustion products are CO ? and H ? O).

　　· RTO/RCO適用于大風量、中高濃度的廢氣。

　　·RTO/RCO is suitable for high air volume, medium to high concentration exhaust gases.

　　· 缺點：

　　·Disadvantages:

　　· 初始投資成本高。

　　·The initial investment cost is high.

　　· 運行需要燃料（天然氣）助燃，盡管RTO已非常節能。

　　·Running requires fuel (natural gas) to assist combustion, although RTO is already very energy-efficient.

　　· 適用場景：大型噴涂車間，VOCs排放量大且環保要求嚴格的場合。

　　·Applicable scenarios: Large spray painting workshops with high VOC emissions and strict environmental requirements.

　　3. 吸收法

　　3. Absorption method

　　· 原理：利用VOCs在吸收劑（專用化學藥劑或油類）中的溶解度，將廢氣通過吸收塔，使其與吸收劑充分接觸而被去除。

　　·Principle: By utilizing the solubility of VOCs in absorbents (specialized chemicals or oils), the exhaust gas is passed through an absorption tower and fully contacted with the absorbents to be removed.

　　· 優點：工藝簡單，對水溶性VOCs（如酮類、酯類）效果好。

　　·Advantages: Simple process and good effect on water-soluble VOCs (such as ketones and esters).

　　· 缺點：

　　·Disadvantages:

　　· 對不溶于水的VOCs（如苯系物）效果差。

　　·The effect on insoluble VOCs (such as benzene derivatives) is poor.

　　· 吸收劑需要定期更換，會產生廢液，造成二次污染。

　　·Absorbents need to be replaced regularly, which can generate waste liquid and cause secondary pollution.

　　· 適用場景：特定成分的廢氣，目前應用相對較少。

　　·Applicable scenarios: Exhaust gases with specific components, currently used relatively less.

　　四、常見的設備組合方案

　　4、 Common equipment combination schemes

　　在實際應用中，通常會根據廢氣參數、投資和運行成本、環保要求等因素，選擇不同的組合方案。

　　In practical applications, different combination schemes are usually selected based on factors such as exhaust gas parameters, investment and operating costs, environmental requirements, etc.

　　方案組合 工藝流程 特點 適用場景

　　Characteristics and Applicable Scenarios of Scheme Combination Process Flow

　　方案一：經濟實用型 水簾/干式過濾 + 活性炭吸附箱 投資低，設備簡單；但活性炭更換頻繁，運行成本高，會產生危廢。 小型噴漆房、間歇性生產、環保要求不極高的地區。

　　Option 1: Economical and practical water curtain/dry filtration+activated carbon adsorption box with low investment and simple equipment; However, frequent replacement of activated carbon results in high operating costs and generates hazardous waste. Small spray painting rooms, intermittent production, and areas with low environmental requirements.

　　方案二：高效達標型 干式過濾 + 沸石轉輪濃縮 + RTO 將大風量、低濃度的廢氣濃縮為小風量、高濃度的廢氣，再進入RTO燃燒。極度節能，凈化效率極高。 大型、連續生產的汽車、機械制造等噴涂線，環保要求嚴格。

　　Option 2: Efficient and compliant dry filtration+zeolite wheel concentration+RTO to concentrate high air volume and low concentration exhaust gas into low air volume and high concentration exhaust gas, which then enters RTO combustion. Extremely energy-efficient, with extremely high purification efficiency. Large, continuous production spray lines for automobiles, machinery manufacturing, etc. have strict environmental requirements.

　　方案三：經典燃燒型 水旋/文丘里 + RTO/RCO 預處理后直接高溫燃燒，處理徹底，系統穩定可靠。 中高濃度、大風量的廢氣，如家具、集裝箱噴涂。

　　Option 3: Classic combustion type water swirl/Venturi+RTO/RCO pre-treatment followed by direct high-temperature combustion, thorough treatment, stable and reliable system. High concentration and high-volume exhaust gases, such as furniture and container spraying.

　　方案四：吸附-脫附-回收 活性炭/沸石吸附 + 熱空氣脫附 + 冷凝回收 可將VOCs成分回收再利用，有經濟效益，但系統復雜，投資高。 適用于單一、有回收價值的溶劑場合，噴漆房因成分復雜較少使用。

　　Option 4: Adsorption desorption recovery activated carbon/zeolite adsorption+hot air desorption+condensation recovery can recover and reuse VOCs components, which has economic benefits, but the system is complex and the investment is high. Suitable for single, recyclable solvent applications, spray booths are less commonly used due to their complex composition.

　　本文由 工業廢氣處理   友情奉獻.更多有關的知識請點擊  http://www.shtzxx.cn/ 真誠的態度.為您提供為全面的服務.更多有關的知識我們將會陸續向大家奉獻.敬請期待. 　　This article is a friendly contribution from industrial waste gas treatment For m

ore related knowledge, please click http://www.shtzxx.cn/ Sincere attitude To provide you with comprehensive services We will gradually contribute more relevant knowledge to everyone Coming soon.